O-Ring Backup Rings for Industrial Sealing Assemblies

Support the Seal. Address the Clearance. Specify With Confidence.

Black O-ring beside a white backup ring for an industrial sealing assembly.

Pressure can force an elastomer seal into the clearance between mating components. O-ring backup rings provide support at that gap, helping limit extrusion when the ring, groove, and operating conditions are properly matched. They support the sealing element rather than replace it. Static Seals Selection Guide

Finn Global Supply helps OEMs, maintenance teams, and purchasing departments review sealing requirements in the context of the assembly. Send your drawing, existing part number, or seal details. Our team can discuss backup ring selection, material requirements, and product availability for your application.

Whether you’re reviewing a new hydraulic assembly or replacing a damaged seal, start with the complete arrangement—not the O-ring dimensions alone.

What Do O-Ring Backup Rings Do?

A backup ring sits beside the sealing element and supports it against the clearance gap. Under pressure, this support helps restrict the elastomer’s movement into that gap.

Anti-extrusion rings are supporting components. The O-ring still provides the primary sealing function, and its compound must remain compatible with the operating media and temperature. Adding a PTFE backup ring does not give an incompatible rubber seal chemical protection. Static Seals Selection Guide

If you’re also selecting the primary seal, review our Industrial O-Rings page for material, size, and construction considerations.

Cutaway showing a backup ring supporting an O-ring beside the sealing clearance.

When to Discuss Hydraulic Backup Rings With Finn

Bring the backup ring into the discussion when reviewing extrusion damage, pressure changes, or clearance concerns. Include what happens during startup, normal operation, and shutdown.

Application detail What to include
Pressure Normal pressure, peak pressure, and pressure reversals.
Clearance Mating-part dimensions and tolerances, including changes under load.
Temperature Minimum and maximum operating temperatures.
Motion Whether the assembly is static, reciprocating, or otherwise moving.
Existing seal O-ring size, compound, hardness, and any backup ring reference.
Observed damage Photos of the seal, groove, and mating surfaces.

There is no single pressure threshold that determines every backup ring requirement. Review pressure together with clearance, temperature, seal material, and the selected support-ring design. Manufacturer limits apply to specific configurations and operating conditions.

PTFE Backup Rings and Other Material Options

Backup rings can be produced from PTFE, filled PTFE, elastomers, and engineering thermoplastics. The appropriate material depends on the required support, operating environment, and installation arrangement. Static Seals Selection Guide

PTFE backup rings are worth discussing where the application calls for a fluoropolymer support component. Filled grades and other materials may be considered when load and deformation requirements call for a different approach. Confirm the exact grade rather than specifying “PTFE” alone. Static Seals Selection Guide

For an inquiry, give FGS the material reference shown on your drawing. If the material is open, include the fluid, temperature, pressure, and clearance so the options can be reviewed. Availability should be confirmed for the required size and construction.

Solid, Split, and Spiral Backup Ring Designs

Construction affects how a backup ring can be installed and how it fits the gland.

Construction Selection consideration
Solid / uncut Check whether the assembly provides access to install a continuous ring.
Split / scarf-cut A cut can facilitate installation into some closed grooves. Confirm the specified cut and orientation.
Spiral Check the designated profile and installation method against the gland drawing.

These constructions are established backup ring options, but they should not be treated as interchangeable without reviewing the design. Static Seals Selection Guide

Finn can work from your existing part reference or drawing to discuss the required configuration and availability.

Solid backup ring constructions shown side by side.

Solid

Split backup ring constructions shown side by side.

Split

Spiral backup ring constructions shown side by side.

Spiral

Backup Ring Placement and Groove Fit

For a conventional single-direction pressure arrangement, the backup ring sits on the low-pressure side of the O-ring. When pressure acts from either direction, support may be required on both sides. Confirm the arrangement against the selected manufacturer’s design guidance.

The gland must accommodate the complete seal arrangement. Adding a backup ring to a groove designed only for an O-ring requires a dimensional review.

For a broader application overview, review our static seals selection guide.

Use our O-Ring Gland & Groove Design Guide to review squeeze, groove fill, clearance, and installation considerations. For ring identification, visit O-Ring Size Charts & Material Specifications.

One-direction Pressure

Backup ring placement beside an O-ring for single-direction and reversing pressure.

Backup ring on low-pressure side

Reversing Pressure

Backup ring placement beside an O-ring for single-direction and reversing pressure.

Backup ring on each side

Specify the Complete Sealing Arrangement

A clear inquiry helps purchasing and engineering work from the same requirements. Include:

For replacement parts, tell us whether the assembly previously operated successfully and what changed before the failure. Our Engineering Seal Design team can help identify the details that need review.

Request Backup Ring Pricing & Availability

Send Finn your drawing or existing part number. Include the O-ring details, groove dimensions, operating conditions, and quantity. We’ll review the requirements and discuss the options available for your assembly.